Second copy of the G62I BIOS dump, sized at 2 MB for a 16-megabit flash chip. Apart from the short label, the name states nothing about the brand, board revision or firmware build. Two reads of one chip are often kept to check consistency, so compare checksums with the other G62I file before choosing which to use. Flash it with a CH341A or a similar SPI programmer only after confirming the board match with a hex editor search and saving the original contents.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →