A duplicate of the G6A firmware image, marked with (2), sized 2.00 MB and stored as a plain binary. The name lacks a manufacturer, board number or BIOS version, so its exact source remains undocumented. A checksum comparison with the first copy tells whether the two are identical. When flashing, use a programmer on a 16 Mbit SPI chip, keep the original dump in a safe place, and confirm the board markings against any notes you have before relying on the file.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →