A duplicate (2) copy of the G6CI firmware dump, 4.00 MB in raw binary form. Neither the laptop maker nor the motherboard number is identified by the name, so treat the file as unverified reference material. Comparing it byte by byte with the first copy can show whether one carries different serial or configuration data. For flashing, use an SPI programmer on a 32 Mbit chip, save the original contents first, and run a verify pass after writing to catch a bad write.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →