Firmware dump of 4.00 MB in raw .bin form, labelled only with the short code G6IC and marked as a second copy by the (2) suffix. No brand, board number or revision is given, so the letters cannot be decoded with certainty. A 4 MB image normally corresponds to a 32 Mbit SPI flash chip, and it is written with a hardware programmer such as a CH341A or RT809. Read and save the original chip contents first, then compare its size and layout with this file before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →