Second copy of the G6P firmware dump, 4 MB and suited to a 32-megabit SPI chip. The short label reveals no manufacturer, motherboard number or version. Compare it with the first G6P file to check whether both reads match. Identify the board by strings inside the image before use, and remember a 4 MB image will not fit a smaller chip. Save the existing chip contents before writing with a CH341A or similar programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →