Firmware image for the Gigabyte GA-970A-D3 at revision 1.2, compressed into a 1.02 MB RAR archive. The board uses the AMD 970 chipset for AM3+ CPUs. Technicians program this file onto the BIOS chip with a flash programmer when the board shows no POST after a corrupted update. Several revisions of this model use different firmware, so verify that the PCB reads rev 1.2. Back up the existing contents first, and confirm the dump size matches the flash capacity before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Jan 2022 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 25 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →