Gigabyte GA-970A-D3 revision 1.4 BIOS, supplied as a 1.02 MB RAR archive. The motherboard is built on the AMD 970 chipset for AM3+ CPUs. Repair shops use such an image to recover a board after a bad flash, writing it straight onto the SPI chip with a programmer like a CH341A. Firmware differs between board revisions, so confirm the PCB is rev 1.4. Read and keep the original contents before writing, and check that the image size corresponds to the installed flash.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 Jan 2022 | Open file on RM Schematics |
| @pepeelectronica | 21 Apr 2022 | Open file on RM Schematics |
| @pepeelectronica | 25 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →