Binary dump named after the GigaDevice GD25LQ128 flash chip, 16.0 MB in size, matching that 128 Mbit part. The name gives no device or board, only the chip type, and the LQ series runs at 1.8 V, so a programmer needs a 1.8 V adapter to read or write it safely. Confirm what equipment the dump came from before flashing, for example by checking strings in a hex editor. Always back up the existing chip contents first, as an unrelated image can brick the board.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @boardviewschematicsfree. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →