GD25Q32 20180524 185542 DDDDENO

BIOS .bin 4.00 MB Shared

Second capture of the same GD25Q32 flash, a 4 MB binary taken on 24 May 2018 with the label DDDDENO. Reading a chip twice and comparing the two files, for example by checksum, is a common way to confirm a clean, stable read before erasing anything. No model, motherboard number or firmware version appears in the name. Check the contents with a hex editor for identifying strings before programming it with a CH341A or similar SPI programmer, and keep the original chip contents backed up.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files

  • GD25Q32 20180524 185542 DDDDENO

    Tiny two-byte companion file saved alongside a GD25Q32 flash dump, holding the status register value read from the chip at the moment of capture on 24 May 2018.

    BIOS · 2 B · 12 Oct 2025
    BIOS bin_s
    —
    biosfilebins
    2 B
  • GD25Q32 20180524 185542 DDDDENO

    Status register snapshot, only two bytes long, saved by a flash programmer during a second read of a GD25Q32 chip on 24 May 2018.

    BIOS · 2 B · 12 Oct 2025
    BIOS bin_s
    —
    biosfilebins
    2 B
  • GD25Q32 20180524 185542 DDDDENO

    Raw 4 MB read of a GigaDevice GD25Q32 SPI flash chip, captured on 24 May 2018 according to the timestamp in the name.

    BIOS · 4.00 MB · 12 Oct 2025
    BIOS bin
    —
    biosfilebins
    4.00 MB