Firmware set for the GDM51 platform on Compal board LA-L247P revision 1.0 (A00), with both an 8MB and a 16MB image. This board is used in the Dell Vostro 3510. The two files suit boards or chip setups of different capacity, so match each image to the SPI chip actually fitted. Write it with a hardware programmer to recover a board that will not boot. Read and save the original chip first, as it carries the service tag, and check the PCB revision.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 27 Jul 2024 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →