Gigabyte G1.Sniper Z97 revision 1.0 BIOS, version F8, as an 8MB image inside a 5.44 MB RAR archive. It suits recovering a board with corrupted firmware by programming the SPI flash chip externally, for example with a CH341A or similar programmer. Gigabyte boards often carry dual BIOS chips, so identify which chip needs writing. Read and save the original contents before flashing, confirm the chip is 8MB to match the image, and check that the PCB revision marking is 1.0, since other revisions may need different firmware.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →