Tested BIOS for the Gigabyte GA-890GPA-UD3H motherboard in its revision 1.0 form, a 725 KB RAR archive. Gigabyte often changes firmware between PCB revisions of the same model, so verify the board reads REV 1.0 near the expansion slots before writing anything. Extract the image and program it to the BIOS flash with an SPI programmer such as a CH341A, or use it to repair a dead board after a failed flash. Save a copy of the current chip contents first and check that the image size equals the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (10)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 4 Feb 2024 | Open file on RM Schematics |
| @biosarchive | 4 Feb 2024 | Open file on RM Schematics |
| @generalbios | 5 Feb 2024 | Open file on RM Schematics |
| @generalbios | 5 Feb 2024 | Open file on RM Schematics |
| @generalbios | 7 Feb 2024 | Open file on RM Schematics |
| @generalbios | 7 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
| @generalbios | 6 Mar 2024 | Open file on RM Schematics |
| @generalbios | 6 Mar 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →