BIOS dump for the Gigabyte GA-890GPA-UD3H desktop motherboard, revision 2.1, packed in a 1.38 MB RAR archive and marked as tested and working. Use it to recover a board with a corrupted or failed firmware update by writing the image to the BIOS flash chip with an SPI programmer. Confirm the revision silkscreened on the PCB reads 2.1 before flashing, since other revisions of this model may use different images. Read and save the original chip contents first, and make sure the image size matches the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (5)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 4 Feb 2024 | Open file on RM Schematics |
| @generalbios | 5 Feb 2024 | Open file on RM Schematics |
| @generalbios | 7 Feb 2024 | Open file on RM Schematics |
| @generalbios | 11 Feb 2024 | Open file on RM Schematics |
| @generalbios | 6 Mar 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →