BIOS firmware for the Gigabyte GA-B85M-D3H motherboard, compatible with revisions 1.0 and 1.1 and marked as tested OK, packed in a RAR archive. Gigabyte boards of this era often carry dual BIOS chips, so check whether one or both flash devices need programming. Use an SPI programmer to restore a board stuck in a boot loop or with no display due to corrupt firmware. Save the original chip contents before writing, confirm the revision on the PCB, and verify that the image size fits the installed flash chip.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 20 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 4 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →