Firmware for revision 1.1 of the Gigabyte GA-EP43-UD3L, intended for a 1 MB BIOS flash chip as stated in the name. The RAR archive is about 1.43 MB, so it may contain extra files besides the image. Use it to recover a board that fails to post after a bad flash, writing the image with an SPI programmer. Read and save the original chip first, confirm the revision 1.1 label on the PCB, and check that the extracted image is exactly 1 MB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2024 | Open file on RM Schematics |
| @generalbios | 8 Apr 2024 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →