Firmware archive for the Gigabyte GA-F2A88X-D3H desktop motherboard, revision 3.0, an AMD A88X socket FM2+ board. Use the BIOS image to reprogram the SPI flash with an external programmer when the board fails to post after a bad update; Gigabyte boards with DualBIOS may need the main or backup chip handled separately. Read and keep the original contents first, check that the revision on the PCB is 3.0, and confirm the image matches the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 10 Sept 2023 | Open file on RM Schematics |
| @generalbios | 12 Oct 2023 | Open file on RM Schematics |
| @generalbios | 15 Oct 2023 | Open file on RM Schematics |
| @generalbios | 19 Oct 2023 | Open file on RM Schematics |
| @generalbios | 26 Oct 2023 | Open file on RM Schematics |
| @generalbios | 29 Oct 2023 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →