BIOS image for the Gigabyte GA-H110M-DS2 DDR3 desktop motherboard, an 8 MB raw binary sized for a 64 Mbit SPI flash. The name marks it as modified for Xeon E3 v5 processors, letting the H110 board run Skylake Xeon chips it does not officially support. Write it with an SPI programmer such as a CH341A after saving a backup of the original chip, which keeps the board's MAC address and serial data. Check that the flash part is 8 MB and that the board is the DDR3 revision before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_xeon_e3v5. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →