Firmware package for the first revision (rev. 1.0) of the Gigabyte GA-X58A-UD3R X58-chipset motherboard, stored as a 2.46 MB RAR archive. No BIOS version or flash chip is mentioned in the name, so inspect the extracted image size and compare it with the chip on your board. A dump like this is typically programmed into the BIOS chip with a hardware programmer when the board will not POST after a failed update. Do not mix it with the rev. 2.0 image, and keep a backup of the existing chip contents before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 25 Nov 2023 | Open file on RM Schematics |
| @generalbios | 16 Dec 2023 | Open file on RM Schematics |
| @generalbios | 17 Dec 2023 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →