Firmware version F3 for the Gigabyte GA-Z97X-UD3H-BK board, revision 1.2, supplied as an 8 MB BIOS image inside a RAR archive. Use it to recover a desktop board with a corrupted BIOS by programming the SPI flash with an external programmer such as a CH341A. Revisions 1.1 and 1.2 can differ in hardware, so check the revision printed on the PCB before flashing. Read and keep a copy of the existing chip contents, and make sure the chip capacity matches the 8 MB image.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →