BIOS binary for the Gigabyte H310M S2 2.0 desktop board, revision 1.0, labelled OK. The 16 MB size corresponds to a 128-Mbit SPI flash chip. It is meant for restoring a board that fails to boot after a bad update or corruption, programmed with an external SPI programmer and clip. Verify the revision printed on the PCB near the slots, and read the existing chip first so the original MAC address and board identifiers can be preserved or re-entered after writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →