Gigabyte H510M H V2 motherboard BIOS, board revision 1.0, labelled OK as a tested image. The raw .bin file is 16MB, the size of a 128 Mbit SPI flash, and is meant for direct writing with a programmer such as a CH341A or RT809H. It helps recover a board that fails to post, has no display or loops after a bad update. Confirm that the model and revision printed near the PCIe slots match, keep a backup of the original chip contents, and verify the write when programming is complete.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →