Intel Gemini Lake firmware module, indicated by the GLK prefix, version 0.1.0.0 with a B token, likely the stepping, dated 2019-03-11 and marked as a production build. At 60 KB it is a component, not a complete BIOS dump, and is normally combined into a full SPI image using Intel's tools. Technicians use such modules to rebuild or correct damaged firmware. Verify the platform and stepping on the board and back up the original flash chip before writing anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @generalbios. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @generalbios | 22 Jan 2025 | Open file on RM Schematics |
| @cidschematicandboardviewofficial | 22 Jan 2025 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 6 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →