Firmware package for a GNET AD1504 device in a 1T1R configuration, which usually means one transmit and one receive antenna chain on a wireless router or access point. The name marks it as version 06 and tested. The 1.6 MB RAR most likely holds a flash image meant for restoring a unit that no longer boots after a failed update. Before writing it with a programmer or recovery tool, dump the existing flash as a backup. Also confirm the hardware variant on the label matches, since radio configurations differ between models.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (7)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 21 May 2020 | Open file on RM Schematics |
| @laptexlaptopbios | 8 Jul 2020 | Open file on RM Schematics |
| @one5technology | 21 Nov 2020 | Open file on RM Schematics |
| @pepeelectronica | 25 Apr 2022 | Open file on RM Schematics |
| @skclappybios | 10 Apr 2024 | Open file on RM Schematics |
| @schematics_bios | 25 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 2 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →