Firmware set for a Compal GPC30 mainboard, LA-J472P revision 2.0, dated 2020-04-10. The name lists a 16 MB image, a 1 MB image and a KBEC keyboard/embedded controller file, and states that it was tested OK. The EC part matters for no-power, charging or keyboard faults, while the main image goes onto the BIOS chip. Write each file to the chip of matching capacity with a programmer, keep a backup of the original contents, and check that revision 2.0 is printed on the board, as 1.0 dumps also exist.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 13 Aug 2024 | Open file on RM Schematics |
| @generalbios | 5 Nov 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →