HP 15 series laptop BIOS for Compal board LA-J951P revision 1.0 with the GPI52 project code, dated 2020-04-22 and marked as OK. The raw binary is 16 MB, meant for a 128 Mbit SPI flash chip. Compal ODM boards follow the LA-xxxxP numbering seen here. Use a programmer such as a CH341A or similar to write it after reading and storing the original chip, and check that the board number printed beside the memory slots or under the keyboard matches before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →