Raw 16 MB binary for the Lenovo NM-C711 motherboard, revision 1.0, with the GS44D and GS54D codes, modified to disable the soldered onboard RAM. A technician uses this when the onboard memory is faulty, so the system can boot from a module in the SODIMM slot. Because it is an uncompressed .bin, it can be loaded straight into programmer software for a 16 MB SPI chip. NM numbering is LCFC's. Save the original dump first and make sure a known-good memory module is installed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @schematiclaptopramkushwaha. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →