Firmware dump labelled for a board identified as H61H-G11, revision 1.0, apparently for an Intel H61 chipset platform judging by the name, with a 4MB image size and a tested OK note. The name carries no vendor, so confirm the model printed on the PCB before use. Such a dump is typically written to the SPI flash with a programmer like the CH341A to revive a board with a corrupted BIOS. Read and keep a backup of the original chip, and check the chip is 4MB so the image fits exactly.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (4)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 25 Nov 2023 | Open file on RM Schematics |
| @generalbios | 16 Dec 2023 | Open file on RM Schematics |
| @generalbios | 17 Dec 2023 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →