Raw 8 MB firmware dump labelled H61M Pro, apparently for a desktop motherboard built on the Intel H61 chipset; the name gives no brand, so the exact vendor must be confirmed from the board itself. An 8 MB binary of this kind normally matches a 64 Mbit SPI chip and is flashed with an external programmer when the system is dead or stuck in a boot loop. Check that the silkscreen model and revision agree, dump and archive the existing chip first, and verify the image after writing to rule out a bad clip contact.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →