BIOS dump for the Haier H81H3-CM desktop motherboard, version 1.0, read from a Winbond W25Q64BV SPI flash, a 64 Mbit or 8 MB part. The name marks the image as tested and working. The H81 in the board name points to an Intel H81 chipset board. To restore it, extract the RAR, back up the existing chip contents with a programmer such as a CH341A, then write and verify the image. The file size must equal the chip capacity, and the board marking should read H81H3-CM V1.0 before flashing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (2)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Dec 2023 | Open file on RM Schematics |
| @generalbios | 14 Jul 2024 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →