Flash memory dump for the Haier LE32B7000C LCD television, supplied as an 8.00 MB raw binary image. The name gives no mainboard number and no flash chip type, so confirm the board inside the set before using it. Technicians write an image like this to the SPI flash with a programmer such as a CH341A or RT809H to cure boot loops, a dead standby state or a corrupted logo. Read and save the original chip contents first, and make sure the chip capacity is 8 MB, because an image of the wrong size will not fit.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →