Raw firmware image for the Haier LE32B8000D LED television using the MS33931-ZC01-01 main board, stored as a 4.00 MB binary. The name does not state which flash chip it came from, but the size points to a 32 Mbit SPI part. A technician programs this onto the board memory when the set stays in standby, reboots in a loop or shows a frozen boot screen. Match the board number printed on the PCB, read and keep the original contents, then flash with a programmer and verify before reassembling the set.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →