SPI firmware for the Haier LE39F32800 LED television using an MSAV3227-ZC01-01 mainboard, taken from a 25Q64 memory chip. The 8.00 MB binary corresponds to the 64 Mbit capacity of that chip. A technician writes it to the board flash to fix boot failures, logo loops or lost settings caused by corruption. Make sure the mainboard code and chip size match, because an 8 MB image will not fit a smaller part, and keep a copy of the original dump before you erase anything.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →