Serial flash image for the Haier LE55B8500DA LED television using the T.MS3393.81 board, sourced from a 25L3206E chip. It is delivered as a 4.00 MB raw binary file. The same model also appears on other boards, so check the code printed on your PCB before choosing this dump. Typical uses are recovering from a bricked update, a boot loop or a missing picture with working backlight. Keep a backup of the original chip, then write and verify the image with an SPI programmer of your choice.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →