Mainboard flash dump for the large Haier LE65B8500DA television, taken from a T.MS3393.81 board fitted with a 25L3206E memory chip. The image is a 4.00 MB raw binary that fills the 32 Mbit chip exactly. MS3393-based boards are used with many panel types, so a dump from a matching model avoids wrong resolution or an inverted image. Read the original chip first, compare the board marking, then write the file with an SPI programmer and check that the verification passes before power-up.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →