256-byte EDID dump for the HannStar HSD101PFW1 10.1-inch class LCD panel. The file stores the display identification normally held in the panel's serial EEPROM, giving resolution, timing and vendor fields to the host graphics adapter. Technicians flash it when a netbook panel shows nothing, flickers at the wrong mode or is listed as a generic display. Note the separate PFW4 image; check the panel label carefully, read and save the current EEPROM contents and only then program this data.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →