EDID binary for the HannStar HSD101PFW4 10.1-inch class panel, 256 bytes, of the type common in netbooks and small tablets. The data describes the native mode, timings and manufacturer that the graphics chip reads during start-up. When the EEPROM is corrupted the screen may stay dark or run at a wrong resolution, and reprogramming this image fixes it. Make sure the panel is exactly the PFW4 variant rather than PFW1, back up the chip first and write it with a 24Cxx programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 29 Apr 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →