EDID dump for the HannStar HSD140PHW1 14-inch class LCD panel, saved as a 256-byte binary. It mirrors the panel's identification EEPROM, which carries resolution, timing and vendor information read by the graphics controller over the DDC lines. Repair shops use such images to revive panels that report garbage data, appear as a default monitor or give no image. Read the original chip with a programmer first and verify the panel model label matches; a second, 128-byte version of this panel image also exists.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →