Panel EDID image for a HannStar HSD173PUW1 display, revision 0-A01, 256 bytes in size. The data corresponds to the display identification EEPROM that tells the laptop graphics hardware the native resolution, timing and manufacturer of the 17.3-inch class panel. It is useful when a corrupted EDID causes a blank screen, odd resolution or an unknown monitor entry. Check that the panel sticker shows the same model and revision, back up the original chip, then program it with a 24Cxx-capable programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 26 Mar 2019 | Open file on RM Schematics |
| @biosarchive | 1 Oct 2020 | Open file on RM Schematics |
| @ShareMan_Electronic_Files | 7 May 2025 | Open file on RM Schematics |
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →