Firmware image for the Hisense 32E5100E1 television on main board TP.MS3663T.PB706, supplied as a raw 8.00 MB BIN file. TP.MS-coded boards are used in many LED TVs, and their software sits in an SPI flash that can be rewritten with a programmer or via USB on some versions. Technicians use such dumps to cure stuck logo, reboot loops or no-backlight faults caused by corrupted software. Confirm the board code and panel match, save the original chip contents and check the flash is 8 MB.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →