hisense lcd42v88gp rsac7.820.1856.roh.vra

BIOS .bin 4.00 MB Shared

Firmware image for the Hisense LCD42V88GP television, taken from the RSAC7.820.1856 main board in its RoHS build, with VRA in the name likely naming a variant. The raw BIN file is 4 MB, which matches a 32 Mbit SPI flash chip. It is used to rewrite the main board memory of a set that will not start, sticks on the logo or reboots continuously. Confirm the board number on the PCB sticker, read and save the existing chip with a programmer, and check that the chip capacity equals the image size.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files