HK.T.RDA8503P538 SAMSUNG 1366X768

BIOS .bin 4.00 MB Shared

A 4 MB binary flash image for an HK.T.RDA8503P538 universal TV board, marked for Samsung and a 1366X768 panel. Firmware for these boards is tied to panel resolution, so fitting it to a different screen gives distorted or no picture. Technicians write such a dump directly to the board's SPI flash with a programmer to fix boot or no-picture faults. Confirm the board code on the PCB, back up the original memory, and make sure the chip capacity matches the 4 MB file.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @hashmielecom. Enginerys does not host this file.

How to open a .bin file

A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.

CH341A + NeoProgrammer / AsProgrammerflashromRT809F / RT809HTL866II / T48UEFITool (to inspect)HxD (hex editor)

More about .bin files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files