Original EC firmware read from an HP 1000 laptop, marked org to indicate an untouched dump. Its size is 1.00 MB, corresponding to an 8 Mbit flash device used for embedded controller code that handles power sequencing, charging, fans and keyboard. It accompanies a separate system BIOS file for the same model. Use it when a board shows no power-on or charging problems caused by corrupted EC code, after confirming the board number on the PCB and backing up the existing chip with a programmer.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →