HP 1000 G2 ZPJA0 LA-271P REV 1.0 W25Q64FW 1.8V

BIOS .rar 2.74 MB Shared

Firmware dump for the HP ElitePad 1000 G2, project ZPJA0, board listed as LA-271P rev 1.0, read from a W25Q64FW chip. The W25Q64FW is a 64 Mbit (8 MB) Winbond flash that runs at 1.8 V, so use a 1.8 V adapter on the programmer to avoid damaging it. The board label follows Compal numbering and appears to match LA-A271P. The RAR is about 2.7 MB. Dump the original chip before writing, and check that the image size equals the flash capacity.

The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.

How to open a .rar file

Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.

7-ZipWinRARThe Unarchiver (macOS)

More about .rar files

Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →

Related files