BIOS dump for the HP 11-f005TU on Quanta board DA0Y0EMB6C0, revision C, in a 3.21 MB ZIP. The 1.8V note indicates the flash chip runs at 1.8 volts, so use a programmer or adapter that supports 1.8 V parts; a 3.3 V programmer can damage it. Quanta boards use the DA0 prefix plus project code and MB suffix. Back up the existing contents before writing, confirm revision C on the PCB and check that the image size matches the chip capacity.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (3)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 28 Sept 2020 | Open file on RM Schematics |
| @biositechyangiyer | 5 Oct 2020 | Open file on RM Schematics |
| @biosdumpcomputer | 26 May 2022 | Open file on RM Schematics |
How to open a .zip file
Compressed archive that every operating system opens without extra software.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →