BIOS image for an HP 15 laptop on Quanta board DA0P5MB26A0, a 16 MB binary for a 128 Mbit SPI flash. The name refers to the symptom it was used against: no display with the Caps Lock LED blinking, a classic HP error code often tied to corrupted firmware. Quanta marks its boards with DA0xxxMBxx0 codes printed on the PCB. Write it with an SPI programmer after backing up the existing chip, and confirm the board number matches and the chip is 16 MB before flashing; memory faults cause the same blink.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @iasviptools. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →