Second saved 8 MB BIOS dump from an HP 17 Pavilion, paired with another read of the same chip and a status register side file. Comparing both copies helps confirm the read was clean before relying on it for recovery. The name gives no board number or firmware version, so the source mainboard must be identified from the PCB itself. Write it to a 64 Mbit SPI chip with a programmer only after backing up the existing contents and checking the board markings match.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosfilebins. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →