BIOS image of 1.00 MB for the IO board of an HP 2000, Inventec number 6050A2493101, revision MB-A02, labelled TPN-I105MV-6. A 1 MB size suits an 8 Mbit SPI chip, so check that the chip capacity matches before flashing. The 6050A… pattern marks Inventec boards built for HP. Use a programmer such as CH341A to write it, but read and save the existing contents first. Confirm the PCB marking, since a dump from a different board may not work.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @ITHINKHS. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →