Firmware dump for an HP 2000 series notebook, stored as a 3.08 MB RAR archive. The name carries a board part number, 010170100-J09-G, and the token U12, which most likely marks the reference of the BIOS flash chip on the board. HP 2000 boards built on this numbering are commonly read with an external SPI programmer when the machine shows no display or will not POST. Compare the part number on the PCB label with the one here, save a backup of the existing chip, and check the file size against the flash capacity before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @biosarchive. Enginerys does not host this file.
All sources (6)
The same file was posted more than once. If one link is dead, try the next.
| Channel | Posted | |
|---|---|---|
| @biosarchive | 16 May 2018 | Open file on RM Schematics |
| @biosarchive | 12 Sept 2018 | Open file on RM Schematics |
| @afssolutions | 4 Aug 2020 | Open file on RM Schematics |
| @pepeelectronica | 23 Apr 2022 | Open file on RM Schematics |
| @schematics_bios | 24 Jul 2026 | Open file on RM Schematics |
| @schematics_bios | 1 Aug 2026 | Open file on RM Schematics |
How to open a .rar file
Compressed archive — the usual wrapper for a schematic + boardview pair or a BIOS + EC set.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →