BIOS dump for the HP 240 G8 laptop built on board 6050A3285801, project name HEDWIG02, MB revision A01, marked A1 and tagged OK, meaning it was reported as working. The 16 MB raw image matches a 128 Mbit SPI flash chip and can be written with a CH341A or similar programmer. The 6050A prefix is the Inventec numbering used on many HP boards. Confirm the number printed on your PCB, save a backup of the original chip contents first, and reapply the serial number and product data afterwards if needed.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptopomi. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →