BIOS dump for the HP 242 G1 on motherboard 6050A2545601, labelled MB-A02, the board revision. The 6050A numbering identifies Inventec as the ODM. The 8.00 MB image corresponds to a 64 Mbit SPI flash and on Intel platforms of this kind usually contains the descriptor, Management Engine and BIOS regions. It is used to recover boards with corrupted firmware via an external programmer. Verify that both board number and revision on the PCB match, and save the original dump before writing.
The button opens the matching file on RM Schematics, or a source page if it is not catalogued there yet. The original attachment is from @bios_laptop. Enginerys does not host this file.
How to open a .bin file
A raw, byte-for-byte image of a flash chip: the main BIOS / UEFI, the embedded-controller (EC) firmware, or both.
Back up your own chip before writing any dump, and match the full board number and revision. Flashing guide →